Autosol Marine Shine – Clean & Polish Your Weathered Fibreglass Surfaces

The materials used for boats and other marine vessels must be strong enough to resist weather elements such as sunlight, rain, and wind. They must also resist extreme temperatures, chemicals, and other biological effects. Ultimately, their materials must be cost-effective, appealing, and customisable so they can remain valuable for a long time.

One of the most commonly used materials in constructing boats and marine vessels is fibreglass. Fibreglass has been dominating industries as it is durable, resistant to elements, affordable, and light weight. And while fibreglass is light weight it is still very strong, which helps it to perform very well on the water when racing or cruising.

Four Common Issues with Fibreglass Boats

Fibreglass yachts, however, may still encounter issues along the way. Here are some of the most common issues seen by fibreglass.

1. Delamination: One of the most common issues with fibreglass boats is the occurrence of delamination. Fibreglass yachts often layer fibreglass with timber or various resins. Delamination occurs when the fibreglass layers pull away or break down from other fibreglass substrates or materials. Delamination occurs most commonly when water is present.

2. Blisters: Blisters may occur with fibreglass boats due to corrosion or water penetration. These small, horizontal cracks and bumps could then lead to the cracking of the fibreglass surface. They can also lead to trapped water droplets.

3. Warping: Warping is another issue that is common with fibreglass boats. This issue can happen when they’re exposed to high loads or intense sunlight for a long period of time. The materials paired with fibreglass substrate are expected to deform when exposed to heat extensively.

4. Fatigue: Sailboats and marine vessels will always be exposed to the impact of waves, wind, sunlight and vibration. These elements can gradually degrade the strength and appearance of fibreglass, especially if the fibreglass is damaged or exposed.

Clean and Polish with Autosol Marine Shine

Some issues with fibreglass yachts can require the total replacement of fibreglass parts and components. Others, however, only require proper cleaning and polishing. If the fibreglass surface continues to be battered by weather elements, you may want to apply a cleaning agent. Autosol Marine Shine is a trusted cleaning agent that you can use for your fibreglass boat. This helpful product is made in Germany and can be obtained here in Australia.

Autosol Marine Shine utilises a mild abrasive rubbing agent to effectively restore shine to the weathered surfaces of your fibreglass boat. It can even be used to polish metal materials such as stainless-steel fittings, making them look new again if surface rust has taken over.

What this product does is it can remove stains and rust that often ruin the appearance of your fibreglass sailboat. Its paste then leaves a thin surface wax with UV inhibitors, delaying any corrosion and tarnishing your sailboat may acquire in the long run. Using this product is easy since the larger tub comes with a bonus applicator.

To acquire an Autosol Marine Shine, you can contact us at Riggtech or purchase it straight from our online shop.

Optimized by: Netwizard SEO