Description
The centre female thread is shorter and designed for use with Aquavalve Tails (Straight, 90°, and 120°) giving the option of tail sizes from 19mm up to 38mm. The Plug, or Threaded Connector can also be used in the centre connection.
NOTE: all Aquavalve Tails that are used with the T-Piece do not face-seal using the Red or Blue washer as they do when used in Aquavalves. Instead, use a suitable thread sealant or PTFE tape to seal threads.
The 1½” Male and Female threads at each end are also parallel and are also designed to seal through the use of a suitable sealant or PTFE tape allowing any orientation of the two joined parts. Do not over-tighten!
- Manufactured from a glass reinforced nylon composite – High strength and light weight
- Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion
- Chemical resistant – Impervious to diesel, petrol and antifouling paints
- UV resistant – Will not break down with ultraviolet light or discolour from the sun
- High quality surface finish – Will not discolour with green film as similar bronze fittings do
- Large operating temperature range – Suitable for all marine environments, from -40°C to +110°C
