Description
Rule 800 Automatic Bilge Pump 12V 50 LPM:
- 12 volt 800 GPH 3.4 amp Automatic. RULE Model 20SA.
Next generation compact submersible 800 GPH Automatic Sensing electric bilge pump – no fl oat switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely effi cient, draw low current and offers high capacity output in a very compact housing, to fi t into the smallest available space. Please note – using the included check valve will reduce the output fl ow of the pump. Consumes 0.20 amps per day. 12 or 24 volt DC only – Cannot be run through 240v transformers. Available in both 12 & 24V models.
3 year limited warranty.
- Fully submersible pump – 800 US gallons per hour – 50 litres per minute.
- Higher flow – optimised impeller to provide greater fl ow at the same amperage as previous model.
- High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC).
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring.
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel.
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance. Discharge hose port is included with each pump.
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation.
- Compact – 120mm Height x 74mm Width x 64mm depth – not incl. discharge.
- 3.4 amp draw @ 12v DC. Consumes only 0.20 amps per day.
- Threaded hose outlet suits 20mm (3/4″) hose.
