Rule-Mate 800 Automatic Bilge Pump 50 LPM

Description

Rule-Mate 800 Automatic Bilge Pump 50 LPM:

• 800 US Gallons per hour – 50 Litres per minute at open flow
• 640 US Gallons per hour – 40 Litres per minute at 1 metre head
• Supplied with 1 x 20mm (3/4″) threaded straight hose outlet Rule-Mate fully automatic submersible bilge pumps with Rule’s exclusive “Spongeability” feature. All-in-one bilge pump & switch so no float switch required.

The innovative design incorporates the bilge pump and water sensor in a single housing.

Unique Rule “Spongeability” feature leaves the bilge the driest ever – when water in the bilge reaches a certain height the solid state sensor automatically activates and the pump runs until the water is pumped out, reducing boat weight, saving fuel and minimizing bilge odour.

Pump check feature – simply touch the pump check button on the pump and hold for a few seconds to test cycle the pump. These pumps have a threaded discharge port with O ring seal and are supplied with both 20mm 90-degree and straight hose ports.

Available in 12 volt or 24 volt.

• 3 year limited warranty.
• Fully automatic all-in-one submersible bilge pump systems.
• No separate float switch required.
• Bilge water sensor and pump in one common housing.
• Pump and sensor are internally common wired for easy installation.
• No battery drain other than when the pump is in use.
• Removable strainer and impeller area are accessible to clear debris.
• Threaded discharge ports for easy installation.
• 1 each straight and 90 degree hose ports supplied with the pump.
• A 3rd wire allows for manual over-ride using a Rule switch panel or it can activate an alarm or indicator lamp if desired.
• Thermal overload protection.
• Single touch pump check test button feature.

All pumps are oval shaped – base footprint size : 110mm x 70mm.
Overall dimensions Inc straight hose port : 190mm L x 80mm W x 115mm H.