Description
Rule 1100 Automatic Bilge Pump 69 LPM:
- 12 volt 1100 GPH 3.7 amp. RULE Model 27DA.
- 24 volt 1100 GPH 1.9 amp. RULE Model 27DA-24.
Next generation compact, high capacity 1100 GPH submersible electric bilge pumps. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.
3 year limited warranty.
- Fully submersible pump – 1100 US gallons per hour – 69 litres per minute.
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model.
- High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC).
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring.
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel.
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump.
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation.
- Compact – 112mm Height x 74mm Width x 64mm depth – not including discharge.
- 3.7 amp draw @ 12v DC. 1.9 amp draw @ 24v DC.
- Straight threaded hose outlets for both 25mm (1) and 28mm (1 1/8) hose.
