Description
Rule LoPro Automatic Bilge Pump – LP900S – 12V:
The NEW Rule LoPro (low profile) bilge pumps are small enough to fit into tight spaces in the bilge – yet they pack real pumping power at 900 gallons per hour – 3,400 litres per hour – 57 litres per minute. These new pumps include numerous features for ease of installation, ease of use and multiple options for use.
AUTOMATIC Operation LoPro Pump:
The automatic LoPro includes all features as detailed further above with the additional benefit of automatic operation in multiple modes – NO float switch is required.
- High or low water sensing mode – the pump can be set to start operation at either 33mm or 50mm bilge water height.
- Electronic automatic timer mode – The pump can be set to automatically check for water every 2 1/2 minutes – if water is present it will continue to run and pump bilge water. This feature is very handy – however if you leave the boat unattended on a mooring it may run down the battery over time, if you don’t have solar panels or a wind generator Etc to constantly charge the battery – in this case set the pump only to high or low mode.
- Includes pump test mode.
- Includes manual over-ride 3rd wire – requires a Rule 3 way panel switch RWB23 or 107 to operate this feature – see next page.
- 12 volt 4 amp use a 7.5 amp fuse.
- 12 volt DC only – DO NOT run direct off a 240v-12v transformer.
